AQUALINE PLUMBING, ELECTRICAL & AIR CONDITIONING LLC

aqualine plumbing electrical and air conditioning Tempe

CALL US TODAY ON:

(480) 795-7917​

Location:

Tempe, AZ

How To Rewire Old House With Minimal Damage?

9/24/2018

Whenever house owners think about rewiring their old houses, their main concern is the damage their house will get during this process. Some are so attached to their property that even this rewiring thought makes them very unhappy. While others, worry about the amount of money that will go into repairs of their house after this task. But, houses which have wiring that is older than 40 years requires rewiring seriously. Whereas, a 10 years old wiring just need updates. We will get to know here about, how you can perform this task with minimal damage to your walls, floors, roofing and structural studs..

  • State codes: Right from the start put full emphasis on the electric codes and conduct. It includes knowing how much electrical load your house requires and how much you got. Hiring Electrician Tempe is perfect for this job. Get full information about fittings from this professional. Get the wiring correct in first go according to the codes and save your building from revised repairs work.
  • Licensed electricians: If you wish and want good for your house, then hire a licensed electrician for rewiring. They take full responsibility of their work and come insured for all the work done. They work in a safer way and it helps to get state approvals. They are experienced and knows how to carry out a rewiring task without damaging the house
  • Blue prints of running pipelines and wiring: While you or your electrician is at rewiring work keep all your blue prints ready. Never puncture a water pipe during rewiring work and the plumbing blue print will let you know this. Structural studs should be left alone and don’t put outlets on both sides of a single beam. Know how to read them and save your house from unnecessary damages.​
Electrician Tempe
  • Automation: Plan in a way that will get you a house which is fully prepared for your future needs. Run wires for speaker installations. Also leave wires for modern appliances that you expect to buy in coming time. It will save your house from drilling and construction in near future. Ask an expert electrician more about house automation in rewiring time.
  • Make proper lists for material: Before you start your electrical wiring, get yourself ready with all the raw materials and a auxiliary kit. Making a written list is better as, you will skip chances of leaving things out this way. Your auxiliary kit should be complete and modern. This will help you work in a smoother manner. With proper tools you can act smartly and save your house from damages.
  • Use of advanced methods: Search and learn more about advanced methods of rewiring. For instance, use of a fish tape will decrease the amount of restorations in your house. It will allow you to pass the wires without breaking the walls entirely. Professional electrician can guide you at this very efficiently. Various other types of methods are also available in the market these days.
  • Measured and systematic drills and cuts: Think twice before you drill at a place. Same way, cuts should be in a systematic manner. Such kind of cut outs will be easy to handle later on. This sort of patches will not appear out of the box as well when the construction is over. Keep your property beautiful even after the restorations.
  • Stay prepared: When you rewire a house entirely, stay prepared for certain amount of demolition in it. Removal of wastage and clean ups should be on your list as well. Keep an amount aside from your whole budget aside the reconstruction work.

Smart Ways To Save Electricity

9/16/2018

Electricity is a daily need. It is now essential for survival. But, the world is seeing a crisis in the electricity industry. Electricity is becoming scarce. It needs to be saved. We are alive because of electricity. It is electricity that we cannot live without. Almost all our devices, and our homes, and cities, and countries run on electricity. We need to live sustainably. We need to promote sustainable development, i.e., living and using resources in such a way that neither you nor the coming generation lacks it. We need to save electricity. The question is, how? As a common citizen of the country, what will you do? What could you do? Well, there are many things you can do to save electricity or call our expert Electrician Tempe for the same.

  • You should always turn off lights that you don’t need. Reading? With the tube light, and the fancy light on? No. Turn off the fancy light. You do not need it.
  • Make use of natural light. Sunlight is a renewable resource, which means that it will be available to you as long as you live, each day. So use it. Instead of turning on lights in the day time, open the curtains, the windows, the door, and let the fresh air and sunlight come in.
  • Make use of task lighting. Technology has advanced so much that now we have lights for particular tasks. For example, study lights. Desks have pre-installed lights or you can buy a study light for the purpose.
  • Don’t use a desktop computer. A desktop computer needs a lot of electricity, from staying on to working on it. Rather, get a laptop. It just needs an hour of charging to run for approximately four hours. Also, it is easier to carry around.
  • Turn off lights and other appliances when not in use. If you are going out, turn off everything. Unplug electronics which are not in use right now.
  • When doing laundry, run full loads. Don’t divide the load in two or more, unless necessary (for white clothes or for those who give out color). Do all of the laundries in one go.​
Electrician Tempe
  • Unplug the second fridge, if you have one. Plug it only when you need it, as when you don’t need it and you keep it plugged in, it is sheer wastage of electricity.
  • Reduce heat in kitchen. Open windows and doors for it. It would help save the electricity generated by the exhaust.
  • Do not keeping opening and closing the fridge door consequently. It leads to less cooling in the fridge and more usage of electricity. Also, keep the freezer temperature a bit low.
  • Dry you laundry by hanging it over ropes in sunlight. The sunlight will stop your clothes from getting all crinkly and harsh, and it would also save the electricity of the dryer.
  • If it is cold outside, wear a sweater and socks to keep yourself warm. It is better than turning the heater on.
  • Let your hair dry naturally rather than using a blow dryer. It saves electricity, as well as keeps your hair from damaging.
  • Get appliances with more than a 3 star rating. It runs the same, but consumes less electricity.
  • Use LED lights. They last longer than CFLs, and they don’t have mercury either.
  • Wash the dishes by hand, rather than using a dishwasher. If using the dishwasher, skip the heat dry mode.
  • Use the geyser less. Make use of the normal tap water or normal drinking water. Or, if you can afford, install solar panels instead.

There are many other ways to save electricity. These were just a few to get started. Take small steps to save electricity and help save the world.

How To Hide The Big AC In Your Own Yard?

8/29/2018

If you reside in a very hot climate, then your AC is possibly your favorite appliance. But, it can promptly become a big party crasher in mid of the backyard summer barbecue. The same boxy, hulking piece of machinery which cools your home can be eyesore in the garden. But do not sweat it anymore. There are many ways you can easily hide, block, conceal and mask your air conditioner unit so that you will not even know it is there. Below is how:

Firstly remember how your AC works and what actually keeps it efficient and happy. An Air Conditioner unit needs some space to breathe. As it works so much hard to make inside of your home cool, it has to vent a lot of produced heat. The reason why the metal casing of air conditioner units are perforated tends to be to do that only. Keep this in your mind while adding any kind of obstruction or cover near your machine. In order to be safe, do check the manufacturer recommended distances for all kinds of enclosure or reach AC Repair Tempe to know in detail.

While designing your new home or retrofitting for new system, remember a happy AC is one which doesn’t need to work so very hard. One method to guarantee this is to utilize an energy-efficient method of home designs which can decrease your reliance on AC and even keep as much cold air inside your house as possible.

Another method to design an effective system is to ensure that the unit has a shady and cool spot where to work. Put it on side of the home with the maximum protection from sun, in order that it does not heat up a lot. Now are the tips to minimize visual impacts.

Fence It In

The most common approach is to just hide the AC from view. For idea on screens and fences that can work for your own garden, take cue from elements you have in the garden already to maintain integrated look.

AC Repair Tempe

Build Up Dedicated Structure

Keeping room for ventilation in your mind, consider creating dedicated structure to provide shade to the machine which might not be situated in the most excellent spot. Based on your garden requirements, this could be even incorporated with place to store lawnmower, pool care supplies, hose, or other stuffs. In this instance a structure built up on to side of the home disguises the system while also offering a spot for the garden tools.

Redesign The Backyard

If you are considering the garden makeover anyway, this might be a good chance to design a unit of the utility spaces which are closed off completely from the view. In this instance a quite small courtyard has been optimized fully for garden storage solution, along with for utility closet which houses the Air Conditioner unit.

Guide View and Distract

The savvy landscape designers can tell you that key to a very beautiful garden, even the one with a big air conditioner in corner, is to just direct the eyes to a very beautiful framed view.

Add Vegetation and Structural Screens

An integrated patio furniture or custom cover may be a bit expensive for a few; a plant screen tends to be a great budget alternative. This straightforward trellis covers your air conditioner, leaving complete access to it easily from behind and even adding vertical element to your garden design. You even could integrate this with the veggie garden to enable climbing plants, such beans, to vertically grow. A few premade trellis systems, such as this one, have the access door also from the front.

Common Issues With Old AC Units

8/24/2018

ACs do not last forever. But there are many other factors that determine how long an air conditioner will work effectively, including manufacturer, size and type of the system, how well your system is maintained, and the frequency of usage. That being said, on average an AC unit last for 8 to 14 years of age.

But how’ll you know if your air conditioner needs to be replaced? First, the dedicated and trained AC Repair Tempe are out there and they can provide their expert options and assist you make best decisions. Secondly, as your AC ages, you may monitor its own performance and look out for the common issues that may arise over time.

Usual Wear and Tear

Regular AC maintenance can assist add many years to your Air Conditioner unit, but after nearly 10 years of use, there is a good possibility that it will not work like it did before and will possibly take longer time to cool your house.

Inefficiencies

Beyond the usual wear and tear, the AC could perform lesser efficiently than new AC unit as it has been damaged slightly in some way, whether it is the fans, compressor, or coils. Any of these problems will cause your AC to work harder as well as affect how it actually cools your house, which will lead to higher energy bill.

Ice Build Up on Evaporator Coil

There are times, especially during high electricity demand and extreme heat, when you might see a little bit of ice collect on parts of the AC unit. It might just be because of dirty air filter and that can impede the air from circulating all around the system’s evaporator coils. But, if you start to see lots of ice building on the evaporator coil, it can mean you’ve a larger issue, such as failing condenser, broken fan, or refrigerant leak.

AC Repair Tempe

Refrigerant Leakage

If the AC unit is lower on refrigerant, possibilities are that you’ve a leakage. Adding refrigerant won’t solve the issue. Beyond affecting performance, the refrigerant leakages can harm the whole environment. If Freon leakage is there in refrigerant line, it is a simple fix, however if it is in the AC compressor, for instance, it can make much more financial sense to invest into a new AC system.

Electric Failure

As the AC unit ages, the possibilities of it shorting go up. A few common electrical problems include failing capacitor, relays that are sealed shut or forced open, or circuit breaker that are tripped frequently. Also, faulty wiring could contribute to electric failure or more severely, a fire in AC unit. Additionally, if your system isn’t maintained appropriately and it is overworked because of higher temperatures, it can catch on fire too.

Issues with Fans

Your Air Conditioner system has two fans— the one which blows the air from inside home over evaporator coils for cooling the air and second one which blows air over outdoor unit condenser, which discharges absorbed heat outside the house. There are many reasons every fan might not work correctly, including damaged motors, worn belts, excessive debris and dirt, or lack of lubrication. Regardless of the problem, the result can be restricted airflow, ultimately leading to AC compressor failure when ignored. If compressor fails, possibilities are you will need a brand new AC.

Leaking Ducts

When time passes by, breaks or holes could grow in ductwork which runs inside your wall and is accountable for carrying air which cools all rooms in your house. This could just be because of age; sealing can start to crack, which lets air to escape. ​

What Should You Do When A Toilet Overflows?

8/6/2018

If there is one thing that you must be able to rely on, it is that the toilet must flush appropriately when you require it to. However life is not fair, toilets block, and in order to make the matters worse -- they may overflow.

Avoiding raw sewage and dirt from spilling over on your bathroom’s floors can be failsafe, however if you know and understand what to do only and have the right tools at an arm’s reach. In case your toilet is quite prone to blockages -- or if you simply want to be ready for worst -- this protocol is critical for emergencies.

Stop It at Source

Regardless of the cause, if your toilet is overflowing, then the most urgent step is to stop flow of water in the bowl. In lots of bathrooms, the most excellent place to do it is at main shutoff valve of the toilet.

You can possibly see water line coming from your bathroom walls to toilet, along with hand-crank valve along that line somewhere. If you do not see this hardware, then it is possible that the toilet’s valve tends to be hidden behind floor or wall tiles, in which situation you should speak to a plumber regarding modifications to offer this access. Lack of not shutting the main valve off to your house, the toilet valve only is the way to stop the water flow fully!

Closing this valve when overflow is quite imminent will stop bowl from filling as well as grant all time you want to clear the blockage. But other than accessing it, turning the valve actually can be quite challenging when it really matters the most. As this valve usually remains open, frequently for years, it could be sticky -- and might even rust in open position.

Be active and give a few turns backward and forward to your toilet valve today. If it is stubborn, then spray it with some lubricant until it freely turns. Going on, close and reopen valve whenever you clean the bathroom. It takes a few seconds only, and it’ll help ensure that you can close that valve in any emergency situation.

Plumber Tempe

Backup Plan

If the toilet is overflowing actively and you cannot get shutoff valve to move, your next stop must be inside of toilet tank. Remove the lid carefully and set it sideway.

The first thing to check is flapper -- generally hinged rubber disc which covers a hole at bottom of tank. If flapper is open, then reach in and manually close it. This must stop the water flow.

If flapper isn’t open, or it won’t remain closed manually, find out the float ball. It’s the component which floats on surface of water and stops tank from filling completely at certain level. In case you lift up the float ball manually to top of tank, water will then shut off.

It can create precarious predicament if nobody is at home to assist you. If lowering float ball makes water to carry on flowing in the bowl, you might need to prop float ball up and hold it in the right place when you fight with shutoff valve with spare hand.

Get The Things Flowing

Once overflow has been stopped, the final step now is to clear that clog. If you’ve a toilet plunger, one with toilet flange preferably, that must be your own go-to tool. In case you do not have one, pick up one today.

And for clogs which you just cannot clear, or for other plumbing emergency, the most failsafe alternative of all is to contact Plumber Tempe as soon as possible.

Contact Us:

*

Indicates required field

Submit